Summary of Contents for Chattanooga Intelect Mobile 2
Page 1
Guide de démarrage rapide • Kurzanleitung • Guía de inicio rápido Snelle start gids • Guida rapida d’avvio • Hızlı başlama rehberi CO M B O, S T I M, U LT R A S O U N D...
I N T E L E C T ® M O B I L E 2 Q U I C K S TA RT G U I D E C O N T E N T S Foreword ���������������������������������������������������� 3 Optional Vacuum Module ���������������������10 Intended User Profile ������������������������������...
This guide is intended for users of Intelect Mobile ® The intelect Mobile 2 device will be used to deliver 2 . It contains general information on operation, a variety of modalities to the patient, ultrasound, precautionary practices, and maintenance.
Page 4
I N T E L E C T ® M O B I L E 2 Q U I C K S TA RT G U I D E CAUTION • This unit should be operated at +5°C to +40°C and 15% to 90% Relative Humidity. The unit should be transported and stored at -20°C to +60°C and 10% to 90% Relative Humidity.
Page 5
STIMULATOR electrodes and possible damage to the STIMULATOR. • Portable RF communications equipment should be used no closer than 30 cm (12 inches) to any part of the Intelect Mobile 2, including cables specified by the manufacturer. Otherwise, degradation of the performance of this equipment could result.
Page 6
I N T E L E C T ® M O B I L E 2 Q U I C K S TA RT G U I D E WARNING • The Intelect® Mobile 2 may be susceptible to Electro-Static Discharge (ESD) at greater than ±6 kV when first grasping the Ultrasound applicator.
Page 7
DANGER • DO NOT connect the unit to an electrical supply without first verifying that the power supply is the correct voltage. Incorrect voltage may cause unit damage, malfunction, electrical shock, fire, or personal injury. Your unit was constructed to operate only on the electrical voltage specified on the Voltage Rating and Serial Number Plate.
I N T E L E C T ® M O B I L E 2 Q U I C K S TA RT G U I D E C O N T R A I N D I C A T I O N S ELECTROTHERAPY The Intelect Mobile 2 should NOT be used under the...
C O N T R A I N D I C A T I O N S ULTRASOUND • Do not use for symptomatic local pain relief unless etiology is established or unless a pain syndrome has been diagnosed. • Do not use when cancerous lesions are present in the treatment area.
HEAD TO CART FIXATION Throughout these instructions the terms “left” and“right” referring to the machine sides are from the See Intelect Mobile 2 Instructions for Use perspective of a user standing in front of the unit. The components of the Intelect Mobile 2 are shown ®...
DEVICE DESCRIPTION Handle Colour Touch Screen ON/OFF button Play / pause button Ultrasound applicator support Adjustment dial Battery cover Vacuum cover ON / OFF switch only USB port for active on mains power software upgrade Mains power connector Ultrasound applicator Lead wire connectors for connectors electro stimulation...
IF UNIT SUPPLIED WITH OPTIONAL PLUGS BATTERY After unpacking Intelect Mobile 2 to fit the battery When inserting the plugs, be sure to align the flat side follow the following steps of the plug with the flat side of the slot and push in 1.
Switch device on with switch on the back of the unit, 3. Complete the registration form to be informed do not position the Intelect Mobile 2 in such a way about new product software version availability and that makes it difficult to disconnect from the mains IFU updates.
HOME SCREEN ICON DESCRIPTIONS DESCRIPTION OF DEVICE MARKINGS Refer to Instructional Manual Stim Booklet Ultrasound Warning, Caution, or Danger Electrical Type BF Equipment Combo Shortcut Ultrasound SPS (Suggested Parameter Setup) Stim Custom Protocols Combo Treatment Data Play Pause Clinical Resources Home ON/OFF Settings...
Page 16
I N T E L E C T ® M O B I L E 2 Q U I C K S TA RT G U I D E This end up Keep dry Temperature Range Relative Humidity Range Atmospheric Pressure Range Testing agency CE Mark of Conformity with notified body number...
CC = constant current, effect of load Width Depth Height impedance on voltage battery) CV = constant voltage, effect of load Intelect Mobile 2 Head Unit impedance on current Output specifications are described for each waveform COMBO 34cm 35.5cm 15cm 3.1kg...
Page 18
Atmospheric Pressure: 50kPa to 106kPa Pulsed mode Time required for the Intelect Mobile 2 to warm from the minimum storage temperature between uses until (*) An error of + 0.25 W can be measured with 1cm2 the Intelect Mobile 2 is ready for its INTENDED USE US applicator, pulse mode 100Hz at 10% or 20% Duty when the ambient temperature is 20 °C: 5h...
Page 19
A P P E N D I X Time required for the Intelect Mobile 2 to cool from the maximum storage temperature between uses until the Intelect Mobile 2 is ready for its INTENDED USE when the ambient temperature is 20 °C: 5h...
Page 20
I N T E L E C T ® M O B I L E 2 Q U I C K S TA RT G U I D E A P P E N D I X WAVEFORMS CC: Constant Current CV: Constant Voltage IFC (Interferential) Traditional (4 Pole) TENS- Asymmetrical Biphasic...
Page 21
A P P E N D I X ™ TENS- Symmetrical Biphasic Advice on size and type of electrodes to be used is given in device GUI "treatment Advice on size and type of electrodes to be used is given in device GUI "treatment guidelines"...
Page 22
I N T E L E C T ® M O B I L E 2 Q U I C K S TA RT G U I D E A P P E N D I X IFC Premodulated (Traditional 2 Pole) High Voltage Pulsed Current (HVPC) Advice on size and type of electrodes to be used is given in device GUI "treatment Advice on size and type of electrodes to be used is given in device GUI "treatment...
Page 24
DJO France SAS Centre Européen de Frêt 3 rue de Bethar 64990 Mouguerre • France T: + 33 (0) 5 59 52 86 90 • F: + 33 (0) 5 59 52 86 91 DJOglobal.com DJO, LLC | 1430 Decision Street | Vista | CA 92081-8553 | U.S.A. www.DJOglobal.com...