Table of Contents
Advertisement
Resetting of Oil Change and Filter Replacement Intervals
Reset oil change and/or oil filter replacement intervals as
needed:
Hydraulic oil change interval hour meter
Oil change intervals can be reset to "4000.0", "2000.0", or
"1500.0". The interval set when the machine was shipped
from the factory is "4000.0".
While displaying the change interval hours, keep pressing
switch (1).
NOTE: When switch (1) is released, time resetting is
completed. Keep pressing switch (1) until the desired resetting
time is displayed.
Time display is changed four seconds after pressing switch
(1). While keeping switch (1) pressed, press switch (3). Each
time switch (3) is pressed, the displayed hours will change in
the order of "4000.0
2000.0
time is displayed, release switch (1) to complete resetting
operation.
OPERATOR'S STATION
1500.0". When the desired
1-30
3
2
1
Remaining hours
before replacement
Alternate display
is displayed.
Keep pressing switch (1).
Time display is changed four
seconds after pressing switch (1).
Press button
Press button
Press button
Release switch (1) to complete resetting operation.
MNDB-01-008
MNDB-01-043
Advertisement
Table of Contents
