Table of Contents
Advertisement
MAINTENANCE UNDER SPECIAL ENVIRONMENTAL CONDITIONS
Maintenance Under Special Environmental
Conditions
WARNING:
Before operating the machine in a river, check the
riverbed conditions in advance.
Avoid driving the machine into a river where the
riverbed is steep and deep or the stream is rapid.
Operating
Conditions
Muddy Soil, Rainy
Before Operation: : Check tightness of plugs and all drain cocks.
or Snowy Weather
After Operation
Near the Ocean
Before Operation: : Check tightness of plug and all drain cocks.
(or near chemical
After Operation
treatment place)
Dusty Atmosphere Air Cleaner
Radiator
Fuel System
Electrical
Equipment
Rocky Ground
Chassis
Front
Attachment:
Freezing Weather
Fuel
Lubricant
Engine Coolant
Battery
Tires and Frames : Keep tires and frames clean. Park the machine on a hard surface to prevent the
When handling
Engine
old paper and/or
compartment
industrial waste
Air cleaner
Fuel system
Loader frame
Radiator
IMPORTANT: If material to be handled is a substance that causes corrosion such as salt or chemical, consult your
nearest Kawasaki dealer. Special modification or treatment may be needed for the machine. If the machine
continues to be used, malfunction may occur due to corrosion.
Consult your nearest Kawasaki dealer when the machine is operated under special condition (s).
Precautions for Maintenance
: Clean the machine and check for cracks and damage. Check for loose or
missing bolts and nuts. Lubricate all necessary parts.
If the machine should be submerged in water more than approximately 450
mm (17.7 in) water may get into the brake device (like the park brake), resulting
in poor braking performance. Watch out when starting/stopping the machine.
: Thoroughly clean the machine with fresh water to wash off salt.
Service electrical equipment often to prevent corrosion.
: Clean the element regularly at shorter service intervals when indicator
illuminates.
: Clean the oil cooler and the radiator cores.
: Clean the filter element and strainer regularly at shorter service intervals.
: Clean them regularly, in particular, the commutator surface of the alternator
and starter.
: Check for damage on tires, for loose, cracked, worn, and damaged bolts and
nuts.
: Standard attachment may be damaged when digging rocky ground. Use a
heavy duty bucket. Consult your nearest Kawasaki dealer.
: Use high quality fuel suitable for low temperature.
Check the fuel tank breather pipe freezing.
: Use high quality low viscosity hydraulic oil and engine oil.
: Be sure to use antifreeze.
: Fully charge the batteries regularly at shorter service intervals. If not charged
fully, electrolyte may freeze.
tires from freezing to the ground.
: Remove old paper and/or waste accumulated around the radiator and in the
engine compartment, possibly causing overheating or fires of the machine if
not removed.
: Clean the element at shorter intervals.
: Clean and replace the elements and the filters at shorter intervals.
: Remove the accumulated paper and/or waste from the surroundings around
the loader frame and the attachment. Failure to do so may cause damage of the
machine.
: Wash as frequently as possible to prevent corrosion due to chemical materials.
9-1
Advertisement
Table of Contents
