Table of Contents
Advertisement
B. Engine
Check Engine Oil Level
--- every 10 hours (machine parked on a level surface
before starting the engine)
IMPORTANT: Incorrect engine oil level may cause engine
trouble (The oil level should be between the upper and
lower marks on oil level gauge (1)).
If engine oil level is too high, lower the oil level to the
proper place before starting the engine.
Check oil level before starting the engine.
Pull out oil level gauge (1). Check for mixing of foreign matter
or contamination in the oil. Wipe oil level gauge (1) with cloth,
re-insert it into the pipe to the end, and then pull it out again.
The oil level should be between the upper and lower marks on
oil level gauge (1).
If oil level is below the lower limit mark, add the recommended
engine oil via oil filler (2).
If oil level exceeds the upper limit mark, remove drain plug (3),
and then drain oil.
Specified Range
NOTE: Level the machine when adding oil or inspecting
oil level. When required to check oil level after operating the
machine, first stop the engine. Wait for more than 15 minutes.
Then check oil level. (This means that the oil will return to the
oil pan, then oil level can be checked.) In case the oil color
changes, severe contamination, and/or mixing of foreign
matter may be seen, change the oil.
WARNING: Do not spill oil while changing oil. Spilled
fuel, oil, and other flammables may cause fires.
MAINTENANCE
2
3
7-26
1
MNEC-07-073
MNEC-07-074
Advertisement
Table of Contents
