Table of Contents
Advertisement
Starting Engine
Follow the following steps to start the engine without
depressing accelerator pedal (3).
1. Be sure that parking brake switch (1) is ON, forward/
reverse lever (8) and/or switch (9) is in neutral (N), and
neutral lever lock (10) is in the LOCK ( ) position.
2. Turn the key switch (2) ON.
3. Check indicator bulbs and display.
When key switch (2) is turned ON, all indicators and the
warning lights come and stay ON for 2 seconds. Then,
they go OFF afterward. Any indicator and/or warning
light that fails to light at this time is a burned bulb.
However, the indicators for brake oil pressure (4) (When
the brake pressure is low) and discharge warning
indicator (5) will continue to stay ON, and it will go OFF
only after the engine is started and circuits are filled.
Preheating will automatically start with the key switch
ON. The preheat indicator (6) will automatically come ON
when needed.
IMPORTANT: When the machine is equipped with the
secondary steering (optional), ensure that steering
oil pressure indicator (11) is lit. If it is not lit, the
secondary steering device is malfunction. Contact your
authorized KAWASAKI dealer for machine inspection.
Steering oil pressure indicator (11) goes off after the
engine starts.
4. Check that parking brake indicator (7) is ON. When the
preheat lamp goes OFF (the engine has preheated),
sound the horn to clear any personnel away from the
area surrounding the machine.
OPERATING THE ENGINE
8
3-5
1
10
9
2
6
2
3
MNDB-01-001
MNEC-07-001
MNDB-01-053
7
4
11
5
MNDB-01-008
Advertisement
Table of Contents
