Table of Contents
Advertisement
How to Use Hydraulic Loader Coupler
When the optional hydraulic coupler system is provided,
installation and removal of the front attachment, such as
bucket, clamp, becomes quick and easy work.
Follow the procedures below to couple or uncouple the
attachment.
NOTE: Regardless of the attachment types, the coupling
procedure is the same.
WARNING: CRUSH HAZARD.
Improperly locked attachment could release and cause
serious injury or death.
Coupling to Attachment
IMPORTANT:
Make sure that hydraulic coupler switch (1) is placed to
"unlock" position (2).
1. In front of the attachment, lower the boom using the
boom control lever.
2. Hold the bucket control lever in "rollback" position until
locking plungers have fully retracted.
3. Slowly move the machine forward and roll coupler (3)
forward to "dump" position to align with attachment
hook (4).
4. Raise coupler (3) into position into hook (4).
3
OTHER ATTACHMENTS AND DEVICE
Quick Coupler
4
M4GB-13-004
13-1
1
3
4
Dump
3
1
MNEC-01-527
2
M4GB-01-175
Rollback
90Z7-13-03
90Z7-13-04
Advertisement
Table of Contents
