Table of Contents
Advertisement
DSS (Down Shift Switch)
Press DSS (2) to down shift the gear. Set the shift gear to 2nd
speed for normal operation. By pressing DSS (2) while digging
with the machine in forward, the gear automatically shifts to
1st speed, which increases drive force and digging force. Once
the forward/reverse lever (4) or forward/reverse switch (3) is
set to reverse (R), the gear returns to 2nd speed.
Press DSS (2) when ECO indicator (5) turns OFF while operating
on a slope or during snow removal. In this case, the gear
temporarily shifts down to 1st speed by pressing DSS (2), but
it automatically returns to 2nd speed when traveling load is
reduced.
NOTE: When in auto shift mode or manual shift mode, each
time DSS (2) is pressed, the gear down shifts to 1st speed.
When in auto shift mode, press and hold DSS (2) to down shift
from 5th speed , 4th speed , 3rd speed, 2nd speed, and then to
1st speed.
OPERATOR'S STATION
3
1-77
3
2
Fingertip Control Type
2
Multi-Function Joystick Type
4
5
70MNDB-01-04
70MNDB-01-05
MNDB-01-002
MNDB-01-008
Advertisement
Table of Contents
