Table of Contents
Advertisement
Dual Lift Arm Auto Leveler Switch
The lift arm auto leveler is a device that automatically stops
the lift arm at the preset position while lowering or raising
the lift arm. Lift arm auto leveler switches (1, 2) preset the
stopping heights.
IMPORTANT:
When the lift arm auto leveler switch is activated
with the bucket loaded, the arm may be stopped at a
position lower than the preset position.
Lower kickout position cannot be preset at a position
higher than the arm level position.
Height kickout position cannot be preset at a
position lower than the arm level position.
Lower Kickout Setting/Height Kickout Setting
Switch
SET (4 and 8):
Sets the lift arm stop position at the
current arm height.
Press and slide to release lock switch (3).
ON (5 and 9):
Stops the raising or lowering lift arm at
the specified height.
OFF (6 and 10):
Deactivates the lift arm auto leveler
function.
Lower kickout stop height setting
1. Hold the lift arm in the desired position at which the lift
arm is stopped during lowering operation.
2. While releasing lock switch (3) on lift arm auto leveler
switch (lower kickout) (1), press SET side (4).
Height kickout stop height setting
1. Hold the lift arm in the desired position at which the lift
arm is stopped during raising operation.
2. While releasing lock switch (7) on lift arm auto leveler
switch (height kickout) (2), press SET side (8).
OPERATOR'S STATION
1-75
1
3
Unlock
MNDB-01-022
Lower Kickout
2
7
Unlock
MNDB-01-022
Height Kickout
1
2
70MNDB-01-04
3
4
5
6
MNDB-01-021
7
8
9
10
MNDB-01-023
Advertisement
Table of Contents
