Table of Contents
Advertisement
Travel Mode Selector
The travel mode selector (1) selects the travel mode. Selecting
the manual mode "
" by using the travel mode selector (1)
switch 1 sets the transmission to manual mode, which allows
manual shift change by using shift switch (2). AUTO 1 and
AUTO 2 are choices selectable at auto-shift mode. Select the
most efficient mode for the travel and work condition.
Be sure to stop the machine and set forward/reverse lever
(2) in the neutral (N) position before operating travel mode
selector (1).
Manual Mode
: Manual gear shift (The gear shifts
according to the shift switch.)
AUTO 1 Mode
: Starts out traveling at 2nd speed. When
traveling load increases, it automatically
shifts from 2nd to 1st speed. (Auto DSS
function)
This mode is suited for heavy digging
work or climbing a slope.
AUTO 2 Mode
: Starts out traveling at 2nd speed. This
mode shifts between 2nd ~ 3rd ~ 4th
speeds.
This mode is suited for loading loose
material, removing snow or a similar
application.
Refer to "MOVING THE MACHINE" section.
NOTE: The AUTO 1 mode shifts up to the set shift lever
position. When the shift switch lever is set to 4th speed, auto-
shift range is 1st to 4th speed. When the shift switch in set to
3rd speed, auto-shift range is 1st to 3rd speed.
OPERATOR'S STATION
1-54
1
MNDB-01-003
MNDB-01-024
2
2
F
3
N
4
R
5
MNDB-01-002
1
Advertisement
Table of Contents
