Table of Contents
Advertisement
Emergency Stop and Restart of Operation
Follow the tips described below when required to stop or
restart operation when an emergency has occurred.
1. Slowly release the accelerator pedal. Depress the service
brake pedal to stop the machine.
2. Slowly depress the accelerator pedal while releasing
service brake pedal to move the machine again.
3. In case the machine is required to park the machine for a
long period of time, return the forward/reverse lever to
neutral (N), turn the parking brake switch ON, and apply
the parking brake to ensure safety.
4. During long load and carry applications, the lift arm
position may lower due to inner hydraulic oil leaks. When
required to adjust the lift arm position, temporarily stop
machine, return the forward/reverse selector switch
lever to neutral, apply the parking brake by turning
the parking brake switch ON. Then, after repositioning
the position of lift arm and bucket, begin moving the
machine again. Always allow the machine to maintain
correct drive position.
MOVING THE MACHINE
4-12
Advertisement
Table of Contents
