Table of Contents
Advertisement
Cigar Lighter (24 VDC Electrical Outlet)
Using Cigar Lighter
WARNING: Never touch other than insulated the knob
part. Otherwise, it may result in severe burns.
IMPORTANT: In case the cigar lighter does not pop out
automatically after 30 seconds after pushing the cigar
lighter in, pull out the cigar lighter manually. Then,
consult the your nearest Kawasaki dealer.
1. Turn the key switch (1) ON.
2. Press and release the lighter knob (2).
3. The cigar lighter knob will return to the original position
when the lighter becomes hot. Pull the cigar lighter out
to use.
4. After using the cigar lighter, insert the cigar lighter into
the panel until the knob is seated in the original position
and not pressed in.
Using 24 VDC Electrical Power Supply
CAUTION: Do not connect accessories that use power
other than 24 VDC (MAX. 5 A). Damage to the batteries
and accessories may result.
Do not use this socket to supply the power for a long
time without running the engine. The batteries may be
discharged.
1. Pull out the cigar lighter knob, and insert an applicable
power socket instead.
2. Turn key switch (1) ON. Power is supplied to the
connected accessory.
3. After using the power supply port, insert the cigar lighter
into the panel until the knob is seated in the original
position and not pressed in.
Ash Tray
WARNING: Take precautions against fires.
Use this ash tray (3) when smoking in the cab.
OPERATOR'S STATION
1-79
2
1
1
3
MNDB-01-003
MNDB-01-053
Advertisement
Table of Contents
