Check Work Lights; Check Horn And Reverse Buzzer - KCM 70Z7 Operation & Maintenance Manual

Wheel loader
Table of Contents

Advertisement

Check Work Lights

--- every 10 hours (daily)
CAUTION: If any burned-out light is found,
immediately replace it with a new one.
Visually check all work lights that they normally illuminate
and/or flash from the front and rear sides of the machine.

Check Horn and Reverse Buzzer

--- every 10 hours (daily)
WARNING: Before checking the horn and/or the
backup alarm, always apply the parking brake and
clear the machine area of other personnel.
The horn switch button is located at the steering wheel center
and bucket control lever. In case the machine is equipped
with a multi-function joystick lever, the horn switch is located
on the multi-function joystick lever. Horn (1) is located on the
front chassis. Reverse buzzer (2) is located at the left side of
the rear grille. Check that reverse buzzer (2) correctly sounds
by operating either the forward/reverse lever or the forward/
reverse switch to the reverse drive side.
MAINTENANCE
2
7-80
MNEC-07-039
MNDB-07-013
1
MNEC-07-039
MNDB-07-013

Advertisement

Table of Contents
loading

This manual is also suitable for:

70tm7

Table of Contents