Prevent Fires
Check for Oil Leaks:
Fuel, hydraulic oil and lubricant leaks can lead to fires.
Check for oil leaks due to missing or loose clamps,
kinked hoses, lines or hoses that rub against each other,
damage to the oil-cooler, and loose oil-cooler flange
bolts.
Tighten, repair or replace any missing, loose or
damaged clamps, lines, hoses, oil-cooler and oil-cooler
flange bolts.
Do not bend or strike high-pressure lines.
Never install bent or damaged lines, pipes, or hoses.
Replace fuel hoses and hydraulic hoses periodically
even if there is no abnormality in their external
appearance.
Check for Shorts:
Short circuits can cause fires.
Clean and tighten all electrical connections.
Check before each shift or after eight (8) to ten (10)
hours operation for loose, kinked, hardened or frayed
electrical cables and wires.
Check before each shift or after eight (8) to ten (10)
hours operation for missing or damaged terminal caps.
DO NOT OPERATE MACHINE if cable or wires are loose,
kinked, etc.
Never attempt to modify electric wirings.
SAFETY
S-29
SA-019