Control Lever Lock - KCM 70Z7 Operation & Maintenance Manual

Control Lever Lock

WARNING:
Be sure to press LOCK ( ) side of control lever lock
switch (1).
Before leaving the operator's seat, be sure to stop
the engine. Then, set control lever lock switch (1) to
the LOCK ( ) position.
Always check to be sure that the control lever
lock switch is set in the LOCK ( ) position before
transporting the machine or leaving the machine at
the end of the shift.
Control lever lock switch (1) is provided to prevent unexpected
machine operation if the operator were to mistakenly come
in contact with the bucket and/or lift arm control lever
when getting on or off the machine. When control lever lock
switch (1) is placed in UNLOCK ( ) position, the control lever
becomes operable.
Control Lever Lock Operation
When leaving the operator's seat:
1. Park the machine on solid level ground. Lower the
bucket to the ground. Return all levers to neutral. Set the
parking brake. Stop the engine.
2. Press LOCK ( ) side of control lever lock switch (1).
Before starting operation:
Before starting operation, check that control lever lock
switch (1) is in the UNLOCK ( ) position.
OPERATING THE MACHINE
5-4
1
MNEC-07-001
LOCK
UNLOCK
MNEC-01-015