Table of Contents
Advertisement
Inspection/ Maintenance Access Side Cover
CAUTION:
Always close side covers (1) during operation.
Do not keep side covers (1) open on a slope or when
a strong wind is blowing. Failure to do so may be
dangerous because side cover (1) may unexpectedly
close.
Take care not to pinch your fingers when opening/
closing the side covers (1).
When side cover (1) is opened, the cover may move
suddenly. Be careful not to come in contact with the
cover.
Before inspecting around the engine, be sure to
secure side cover (1) with holding rod (4).
In case the machine is equipped with the fenders (2)
on side covers (1), never ride on the fenders (2).
When opening side cover (1), pull latch (3).
NOTE: When required to inspect the machine with side cover
(1) kept open, lock side cover (1) using the holding rod (4)
provided inside the side cover.
Side cover (1) has a holding groove. Engage the holding rod
(4) in the holding groove.
MAINTENANCE
7-10
1
2
MNDB-01-014
4
MNDB-01-016
3
Advertisement
Table of Contents
