Table of Contents
Advertisement
Inspection/Maintenance Side Access Cover
CAUTION:
Always close side covers (1) when moving and/or
operating machine.
Do not keep the side cover open on a slope or when
a strong wind is blowing. Failure to do so may be
dangerous because the side cover may unexpectedly
move or close.
Take care not to pinch fingers when opening/closing
side cover (1).
As the side cover flips up by itself, care should be
taken not to be hit with the cover when opening it.
Before checking around the engine, be sure to lock
the cover in position with locking rod (3) provided
inside the side cover.
Never attempt to stand on fender (2) if side cover (1)
is provided with fender (2).
If the gas struts become weak, replace them
immediately.
NOTE: Lock the side cover in position with locking rod (3).
OPERATOR'S STATION
1-105
1
2
MNDB-01-014
3
MNDB-01-016
Advertisement
Table of Contents
