Table of Contents
Advertisement
Drive Speed Change
The transmission gear range of 1st, 2nd, 3rd and 4th can be
selected by turning shift switch (1).
Refer to item 6 on page 4-4 for the auto-shifting mode.
1st and 2nd
: To be used for excavation and loading
ranges
work
3rd, 4th and 5th
: To be used for traveling over long
ranges
distances.
NOTE: Avoid rapid gear changes using shift switch (1)
while traveling at high speed. Shift the gear range only after
reducing the travel speed by releasing the accelerator pedal.
Changing Forward/Reverse Drive Direction
WARNING:
Before changing the forward/reverse drive direction,
confirm that the direction of drive is clear.
To ensure operator's safety and ensure the longevity
of the power train, change the machine drive
direction only after sufficiently slowing machine
down.
Be sure to change the machine drive direction only
when the machine travel speed is 13 km/h (8 mph) or
slower if the gear is in 3rd, 4th or 5th range.
1. Pull neutral lever lock (2) to the UNLOCK ( ) position.
2. Press the OFF position of parking brake switch (3).
3. Move forward/reverse lever (1) to the desired position.
F
:
Forward Driving
N :
Neutral
R
:
Reverse Driving
MOVING THE MACHINE
4-9
3
1
2
MNDB-01-002
Advertisement
Table of Contents
