Table of Contents
Advertisement
Machine Information Controller
This machine provides a machine information controller that stores machine operation information for preventive
maintenance.
When maintaining the machine, our authorized service man may down load the stored information via satellite.
Consult with your nearest authorized dealer for detailed function of this device.
Communication Terminal Operation (Option)
It is not necessary to check or operate the communication terminal however if any abnormality is found, consult your
nearest authorized dealer.
Before installing any covering attachment such as a head guard, consult your nearest authorized dealer.
Never spray water on the communication terminal and wiring.
Inquire on the proper way to recycle or dispose of oil, fuel, coolant, filters, batteries and other waste from your local
environmental or recycling center, or from your authorized dealer.
Check the Hour Meter Regularly
Refer to the List of Check and Maintenance for information about lubricants, check and adjustment intervals. The
maintenance guide table is affixed in the back of the tool box cover. Refer to 7-5 page.
This manual recommends grouping the intervals into three categories as follows:
Daily Check
: To be conducted daily before operation (every 10 hours)
Monthly Check : To be regularly conducted once per month (every 250 hours)
Annual Check : To be regularly conducted once per year (every 2000 hours)
Check and maintenance intervals shown in this manual are those for the machines to be operated under normal
conditions. In case the machine is operated under more severe conditions, shorten the intervals.
MAINTENANCE
7-2
Advertisement
Table of Contents
