Table of Contents
Advertisement
Clock Setting Mode
The clock display on the machine information display screen
can be set in the clock setting mode.
NOTE: If battery power is interrupted over an extended time
period, the clock display may indicate "Year of 2000, Month of
01, day of 01, and time of 00:00" when the engine is restarted.
Other information data, such as maintenance intervals, will
not be reset or deleted due to this insufficient power supply.
Clock (24H) Setting Procedures
After selecting the clock display on the information display
screen, press and hold both selectors (1 and 3) at the same
time for more than 1 second to shift the information display
screen to the clock setting mode.
1. Year Setting
Press monitor display selector (2 or 3) to increase or
decrease the figure displayed on the screen respectively.
After displaying the desired year, determine the displayed
year by pressing monitor display mode selector (1). Then,
move to the next setting screen.
2. Month Setting
Press monitor display selector (2 or 3) to increase or
decrease the figure displayed on the screen respectively.
After displaying the desired month, determine the displayed
year by pressing monitor display mode selector (1). Then,
move to the next setting screen.
3. Day Setting
Press monitor display selector (2 or 3) to increase or
decrease the figure displayed on the screen respectively.
After displaying the desired day, determine the displayed
year by pressing monitor display mode selector (1). Then,
move to the next setting screen.
4. Hour Setting
Press monitor display selector (2 or 3) to increase or
decrease the figure displayed on the screen respectively.
After displaying the desired hour, determine the displayed
year by pressing monitor display mode selector (1). Then,
move to the next setting screen.
5. Minute Setting
Press monitor display selector (2 or 3) to increase or
decrease the figure displayed on the screen respectively.
After displaying the desired minute, determine the
displayed year by pressing monitor display mode selector
(1). Then, clock setting is complete.
OPERATOR'S STATION
1-39
3
2
1
Year
Month
Day
Hour
Minute
MNDB-01-008
M4GB-01-174
Advertisement
Table of Contents
