Table of Contents
Advertisement
Auto Idling Stop Switch
WARNING: This function automatically stops
the engine. Take extra care on the work and work
environment when using this function.
When auto idling stop switch is set in ON, the engine
automatically stops after the preset time when all the
following conditions are satisfied:
Parking brake switch is turned "ON".
The throttle pedal is released.
The hydraulic control levers are not used.
Any one of the above conditions is not satisfied during the
countdown period, the shutdown timer is canceled and the
engine will not stop.
30 seconds before the engine stop, the indicator (2) starts
flashing. The buzzer also sounds. The buzzer sounds once at 30
seconds before, intermittently sounds from 15 seconds, and
then stops after 15 seconds.
IMPORTANT:
Do not leave the machine after auto idling stop.
Failure to do so may discharge the batteries.
To restart the engine, turn the key switch OFF, and
then perform normal starting procedure.
NOTE: The length of time before automatic engine stop is set
by the factory at five minutes. To adjust/change the factory
set period, contact your authorized dealer.
OPERATOR'S STATION
1-56
2
1
MNDB-01-001
1
MNDB-01-018
Advertisement
Table of Contents
