Kind Of Oils - KCM 70Z7 Operation & Maintenance Manual

Wheel loader
Table of Contents

Advertisement

Kind of Oils

Recommended Grease
Application
Manufacturer
British Petroleum
Caltex Oil
Idemitsu Kosan
Exxon Mobil Oil
Nippon OIL
Shell OIL
JAPAN ENERGY
NOTE: Be sure to use a lithium-based grease for universal
joints and a propeller shaft spline. If other types of chassis
grease are used, premature wear and/or a noise emission may
result.
Use multipurpose-type EP/MOLY grease for most applications.
NLGI No. 2 grease is suitable for most temperatures. Use NLGI
No. 1 or No. 0 grease for extremely low temperature.
The machine shipped from factory is filled with lubricants
marked with
.
Recommended Engine Oil
IMPORTANT: Use engine oil equivalent to DH-2 specified
in JASO or CJ-4, API. Failure to do so may reduce the
engine performance and/or shorten the engine service
life. Please be noted that all engine failures caused
by using engine oil other than specified are excluded
from Kawasaki Warranty Policy. Consult your nearest
Kawasaki dealer for the unclear points.
Kind of Oil
Engine Oil
Application
Engine Crankcase
Air Temp.
-20 to 20 °C (-4 to 68 °F)
Manufacturer
Hitachi
Super Wide DH-2 10W-30 Super Wide DH-2 15W-40
Exxon Mobil
MAINTENANCE
Front Joint Pin, etc.
-20 to 45 °C (-4 to 113 °F)
BP Energrease LS-EP2
Multifax EP2
Daphne Eponex SR2
Mobilgrease XHP222 Special
Epinoc Grease AP2
Shell Alvania EP2
*JOMO Lisonix Grease EP2
-15 to 40 °C (5 to 104 °F)
Delvac 1300 Super (PROTEC ELITE 15W-40)
SAE 10W-30
7-17
JASO
DH-2

Advertisement

Table of Contents
loading

This manual is also suitable for:

70tm7

Table of Contents