Configuring The Pulse/Rf Blank (Keysight Mxg); Configuring The Pulse/Rf Blank (Esg/Psg) - Keysight E4428C ESG RF Programming Manual

Creating and Downloading Waveform Files
Troubleshooting Waveform Files

Configuring the Pulse/RF Blank (Keysight MXG)

SCPI commands:
[:SOURce]:RADio[1]:ARB:MDEStination:PULSe NONE|M1|M2|M3|M4
[:SOURce]:RADio[1]:ARB:MDEStination:PULSe?
For details on each key, use the key help. Refer to
additional SCPI command information, refer to the SCPI Command Reference.

Configuring the Pulse/RF Blank (ESG/PSG)

Mode Setup
Hardkey
For details on each key, use the Key and Data Field Reference. For additional SCPI command information, refer to the SCPI Command
Reference.
314
"Getting Help (Keysight MXG)" on page 21
SCPI commands:
[:SOURce]:RADio:ARB:MDEStination:PULSe NONE|M1|M2|M3|M4
[:SOURce]:RADio:ARB:MDEStination:PULSe?
If the default marker is used,
toggle the Pulse/RF Blank (None)
softkey to None. For more
information on markers, refer to
"Marker File" on page 223
and the User's Guide. For
If the default marker is
used, toggle the
Pulse/RF Blank (None)
softkey to None. For
more information on
markers, refer to
"Marker File" on
page 223
Keysight Signal Generators Programming Guide
.
.