Keysight E4428C ESG RF Programming Manual page 348

Creating and Downloading User–Data Files
User File Data (Bit/Binary) Downloads (E4438C and E8267D)
There are three ways to FTP a file:
• use Microsoft's Internet Explorer FTP feature
• use the signal generator's internal web server (ESG firmware ≥ C.03.76)
• use the PC or UNIX command window
Using Microsoft's Internet Explorer
1. Enter the signal generator's hostname or IP address as part of the FTP URL.
ftp://<host name> or <IP address>
2. Press Enter on the keyboard or Go from the Internet Explorer window.
The signal generator files appear in the Internet Explorer window.
3. Drag and drop files between the PC and the Internet Explorer window
Using the Signal Generator's Internal Web Server
1. Enter the signal generator's hostname or IP address in the URL.
http://<host name> or <IP address>
2. Click the Signal Generator FTP Access button located on the left side of the window.
The signal generator files appear in the web browser's window.
3. Drag and drop files between the PC and the browser's window
For more information on the web server feature, refer to the Programming Guide.
Using the Command Window (PC or UNIX)
1. From the PC command prompt or UNIX command line, change to the proper directory:
• When downloading from the signal generator, the directory in which to place the file.
• When downloading to the signal generator, the directory that contains the file.
2. From the PC command prompt or UNIX command line, type ftp <instrument name>.
Where instrument name is the signal generator's hostname or IP address.
3. At the User: prompt, press Enter (no entry is required).
4. At the Password: prompt, press Enter (no entry is required).
5. At the ftp prompt, type the desired command:
To Get a File From the Signal Generator
get /user/<directory>/<file_name1> <file_name>
To Place a File in the Signal Generator
put <file_name> /user/<directory>/<file_name1>
• <file_name1> is the name of the file as it appears in the signal generator's directory.
• <file_name> is the name of the file as it appears in the PC/UNIX current directory.
340 Keysight Signal Generators Programming Guide