Keysight E4428C ESG RF Programming Manual page 246

Creating and Downloading Waveform Files
Commands for Downloading and Extracting Waveform Data
Table 5-9 Downloading Unencrypted Files for Extraction
Download Method/ Command Syntax Options
Memory Type
SCPI/non–volatile
MEM:DATA:UNPRotected "/user/waveform/file_name",<blockdata>
a
MEM:DATA:UNPRotected "/user/markers/file_name",<blockdata>
memory
MEM:DATA:UNPRotected "/user/header/file_name",<blockdata>
MEM:DATA:UNPRotected "NVWFM:file_name",<blockdata>
MEM:DATA:UNPRotected "NVMKR:file_name",<blockdata>
MEM:DATA:UNPRotected "NVHDR:file_name",<blockdata>
MEM:DATA:UNPRotected "file_name@NVWFM",<blockdata>
MEM:DATA:UNPRotected "file_name@NVMKR",<blockdata>
MEM:DATA:UNPRotected "file_name@NVHDR",<blockdata>
b put <file_name> /user/bbg1/waveform/<file_name>
FTP/volatile memory
put <file_name> /user/bbg1/markers/<file_name>
put <file_name> /user/bbg1/header/<file_name>
FTP/non–volatile
put <file_name> /user/waveform/<file_name>
b
put <file_name> /user/markers/<file_name>
memory
put <file_name> /user/header/<file_name>
a
On the N5162A/82A the :MEM:DATA:UNPRotected command is not required to be able to extract files (i.e. use :MEM:DATA). For more
information, refer to the SCPI Command Reference.
"FTP Procedures" on page 240
b
See
Table 5-10 Extracting Unencrypted I/Q Data
Download Command Syntax Options
Method/Memory
Type
SCPI/volatile
MMEM:DATA? "/user/bbg1/waveform/<file_name>"
memory
MMEM:DATA? "WFM1:<file_name>"
MMEM:DATA? "<file_name>@WFM1"
SCPI/non–volatile
MMEM:DATA? "/user/waveform/<file_name>"
memory MMEM:DATA? "NVWFM:<file_name>"
MMEM:DATA? "<file_name>@NVWFM"
FTP/volatile
get /user/bbg1/waveform/<file_name>
a
get /user/bbg1/markers/<file_name>
memory
get /user/bbg1/header/<file_name>
FTP/non–volatile
get /user/waveform/<file_name>
a get /user/markers/<file_name>
memory
get /user/header/<file_name>
"FTP Procedures" on page 240
a
See
238
.
.
Keysight Signal Generators Programming Guide