Vxi-11 Programming Using Sicl And C - Keysight E4428C ESG RF Programming Manual

Programming Examples
LAN Programming Interface Examples

VXI-11 Programming Using SICL and C++

The following program uses the VXI- 11 protocol and SICL to control the signal generator. Before
running this code, you must set up the interface using the Keysight IO Libraries IO Config utility.
vxisicl.cpp performs the following functions:
• sets signal generator to 1 GHz CW frequency
• queries signal generator for an ID string
• error checking
The following program example is available on the signal generator Documentation CD- ROM as
vxisicl.cpp.
//****************************************************************************************
//
// PROGRAM NAME:vxisicl.cpp
//
// PROGRAM DESCRIPTION:Sample test program using SICL and the VXI-11 protocol
//
// NOTE: You must have the Keysight IO Libraries installed to run this program.
//
// This example uses the VXI-11 protocol to set the signal generator for a 1 gHz CW // frequency. The
signal generator is queried for operation complete and then queried
// for its ID string. The frequency and ID string are then printed to the display.
//
// IMPORTANT: Enter in your signal generators hostname in the instrumentName declaration
// where the "xxxxx" appears.
//
//****************************************************************************************
#include "stdafx.h"
#include <sicl.h>
#include <stdlib.h>
#include <stdio.h>
int main(int argc, char* argv[])
{
INST id;
int opcResponse;
char instrumentName[] = "xxxxx"; // Put your instrument's hostname here
char instNameBuf[256];// Variable to hold instrument name
char buf[256];// Variable for id string
ionerror(I_ERROR_EXIT);// Register SICL error handler
118
// Device session id
// Variable for response flag
Keysight Signal Generators Programming Guide