Keysight E4428C ESG RF Programming Manual page 15

Using VISA Configuration (Manual)
Use the Keysight IO Libraries Suite 15.0, to perform the following steps to use the Connection Expert
and VISA to manually configure an interface.
1. Run the Keysight Connection Expert program: Start > All Programs > Keysight IO Libraries Suite >
Keysight Connection Expert >.
2. On the tool bar select the Add Interface button.
3. Click LAN Interface in the Available interface types text box.
4. Click the ADD button.
5. Verify that the Auto (automatically detect protocol) bubble is checked. Click O.K. to use the default
settings.
6. Click LAN(TCPIPO) in the Instrument I/O on this PC text box.
7. On the tool bar select the Add Instrument button.
8. Click the Add Address button in the Add LAN Instruments window.
9. Enter the hostname of the instrument or select the Use IP Address check box and enter the IP
address.
10. Click OK.
Keysight Signal Generators Programming Guide
Getting Started with Remote Operation
IO Libraries and Programming Languages
7