Keysight E4428C ESG RF Programming Manual page 25

LAN Configuration System Defaults (Keysight MXG)
NOTE The instrument's LAN configuration system information can be found on the signal
generator's homepage and on the signal generator. Refer to "Enabling the Signal Generator Web
Server" on page 14 and to "Displaying the LAN Configuration Summary (Keysight MXG)" on
page 18.
If the instrument has been restored to the factory defaults from the LAN Setup menu the signal
generator will revert to the values displayed in Table 1-1 on page 17. Refer to "Displaying the LAN
Configuration Summary (Keysight MXG)" on page 18.
To reset the instrument LXI password to "agilent" and the LAN settings to their factory default
values, press the following key sequence on the signal generator:
Utility > I/O Config > LAN Setup > Advanced Settings > More 2 of 2 > Restore LAN Settings to Default Values >
Confirm Restore LAN Settings to Default Values
NOTE
There are no SCPI commands associated with this LXI password factory reset.
For more information, refer to the signal generator's Web Server Interface Help.
Table 1-1 LAN Configuration Summary Values
Parameter
Signal Generator LAN Configuration Summary
Hostname:
Config Type:
IP Address:
Connection Monitoring:
Subnet:
DNS Server Override:
Gateway:
Dynamic DNS Naming:
RFC NETBIOS Naming:
DNS Server:
Keysight Signal Generators Programming Guide
Default
Keysight–<model number>–<last_5_chars_of_serial_number>
AUTO
127.0.0.1
On
255.255.255.0
Off
0.0.0.0
On
On
0.0.0.0
Getting Started with Remote Operation
Using the Web Browser
17