NXP Semiconductors
Figure 74. AMUX menu
Measurement graphs can be edited using their editing bar, as shown in
Figure 75. Measurement graphs
6.5.6.9 General I/Os
The General I/Os tab allows the user to control I/O levels, to configure Wake-Up/Interrupt features, and to
operate the Cyclic Sense feature depending on I/Os desired configuration. A preconfiguration of the I/Os is
done by OTP.
• I/O Control: To control I/O output levels when configured as outputs.
• I/O Wake-up/Interrupt Enable: To enable the Wake-Up and/or Interrupt feature on I/O.
UM11879
User manual
All information provided in this document is subject to legal disclaimers.
Rev. 2 — 25 September 2023
UM11879
KITFS23LDOEVM evaluation board
Figure
75:
© 2023 NXP B.V. All rights reserved.
49 / 73