Table of Contents
Advertisement
NXP Semiconductors
Figure 26. View menu: Show
• Naming Conventions: Allows the user to select Friendly or Register name display for OTP tool. Option
enabled only when OTP tool is active.
Figure 27. View menu: Naming Conventions
The naming convention options are:
– Friendly: Register names are displayed as user-friendly names in the OTP tool.
– Register: Register names are displayed by their technical name in the OTP tool.
Example: Power Sequence Slot For LVIO3 ⇔ LVIO3_SLOT_OTP.
6.2.3 Import/Export menu item
The Import/Export menu item allows the user to manage the files needed for Mirror emulation, for PROG
tool, and for GUI configuration. This menu item is only active when the OTP tool has been selected. See
Section
6.5.2.
Figure 28. Import/Export menu
• TBB: Exports the OTP configuration into a TBB script file that can be used to load the Mirror registers using
SCRIPT tool. The same file can be used by the PROG tool to burn OTP fuses.
• HEX: Outputs the OTP configuration in I-HEX (Intel Hex) or S-HEX (Simple Hex) script file format.
• Save CFG: To save the current configuration as a CFG file.
• Load CFG: To load a previously saved configuration from a CFG file.
• Default CFG: To load a predefined OTP configuration in QM or ASIL B to use as a starting point.
UM11879
User manual
All information provided in this document is subject to legal disclaimers.
Rev. 2 — 25 September 2023
UM11879
KITFS23LDOEVM evaluation board
© 2023 NXP B.V. All rights reserved.
26 / 73
Advertisement
Table of Contents
