Table of Contents
Advertisement
NXP Semiconductors
Figure 48. Functional Safety tab
6.5.2.1.4 Program ID tab
The Program ID tab displays the OTP ID. Only NXP users can create an OTP ID.
Figure 49. Program ID tab
6.5.2.1.5 Calculator tab
The Calculator tab is available for FS2320 version only.
6.5.2.2 OTP Details window
The OTP Details window collects and stores information about the customer and OTP version. All the
information entered in this section will be part of the CFG and TBB files.
This section is organized into two boxes:
Customer
Details box:
Collects and
displays
customer
contact
information.
Figure 50. Customer Details
UM11879
User manual
Program Details box: In addition to
comments related to the application,
this window allows the user to:
□ Select device type. See
Section
6.5.2.1.3.
□ Display the OTP ID (set by NXP only)
□ Display the build part number (set by
NXP only)
□ Select target market, either
automotive or industrial
All information provided in this document is subject to legal disclaimers.
Rev. 2 — 25 September 2023
UM11879
KITFS23LDOEVM evaluation board
Figure 51. Program Details
© 2023 NXP B.V. All rights reserved.
35 / 73
Advertisement
Table of Contents
