Table of Contents
Advertisement
NXP Semiconductors
Figure 64. Bit-Map Dialog
6.5.6.1.4 Modifying multiple registers using the lower Read/Write/Reset bar
In the Registers Content window, the user can read, write, and/or reset multiple FS2300 SPI/I
time using the lower Read/Write/Reset bar.
• Checkboxes allow the user to select the registers to be read or written.
• Selecting the Select All checkbox allows the user to simultaneously act on all the registers in the Register
subtab.
• Read, Write, and Reset buttons allow the user to act on the previously selected registers. The Reset button
switches all the bits in the register to 0.
Navigating in the Registers content in the Register subtab can be facilitated using the selection box in the bar.
Figure 65. Read/Write/Reset bar
UM11879
User manual
All information provided in this document is subject to legal disclaimers.
Rev. 2 — 25 September 2023
UM11879
KITFS23LDOEVM evaluation board
2
C registers at a
© 2023 NXP B.V. All rights reserved.
43 / 73
Advertisement
Table of Contents
