NXP Semiconductors
Figure 62. Registers Content window
6.5.6.1.2 Accessing one register content using Read and Write buttons
In the Registers Content window, the user can read and/or write the FS2300 SPI/I
and Write buttons.
To read the content of one register:
• Click Read next to the corresponding register name.
• The current register content is displayed as a hexadecimal value next to the Read button.
To write the content of one register:
• Enter the desired register value as a hexadecimal value in the box next to the Write button.
• Click Write next to the corresponding register name.
• As a crosscheck, the current register value can be accessed by clicking Read.
Figure 63. Get current register value
6.5.6.1.3 Accessing one register content using Bit-Map Dialog
In the Registers Content window, the user can read and/or write the FS2300 SPI/I
Dialog window.
Clicking the Green Pencil next to the corresponding register name opens the Bit-Map Dialog window and
shows the name and description of all of the register's bitfields.
The Bit-Map Dialog window:
• Allows the user to change bit values from selection boxes on the left side.
• Displays the current register content on the right side.
UM11879
User manual
All information provided in this document is subject to legal disclaimers.
Rev. 2 — 25 September 2023
UM11879
KITFS23LDOEVM evaluation board
2
C registers using the Read
2
C registers using the Bit-Map
© 2023 NXP B.V. All rights reserved.
42 / 73