Table of Contents
Advertisement
NXP Semiconductors
Figure 54. Generate an initialization script example (INIT-Script)
Note: HELP button in the Script bar gives information on Commands.
Figure 55. Script command panel help
All menu items work in a similar way. The example below shows a typical process using the Registers menu
tab.
How to use the script tool: Clicking the Register tab brings up the parameters panel shown in
Write operation to the CTRL1 register in the functional register group has been selected. The value 0x00 is
selected as the value to be written to the register. Hitting Enter with the cursor in the value field enters the well-
formed command in the Script Commands window.
To apply the commands on the Script Commands window, click RUN in the Script bar. The sent commands are
displayed in the Log window and command results are displayed in the Script Results window.
UM11879
User manual
All information provided in this document is subject to legal disclaimers.
Rev. 2 — 25 September 2023
UM11879
KITFS23LDOEVM evaluation board
Figure
© 2023 NXP B.V. All rights reserved.
56. A
38 / 73
Advertisement
Table of Contents
