NXP Semiconductors KITFS23LDOEVM User Manual page 16

NXP Semiconductors
Table 14. HSx configuration with corresponding resistor configuration
HS1
HS2
HS3
HS4
WAKE1
WAKE2
Simple input
HVIO1 Available
HVIO2 Available
LVIO3 Available
LVIO4 Available
LVI5 Available if I²C
LVO6
Regarding J23, remove any jumper between J23-1-2 and J23-3-4 when HVIOx are used as output, or when
voltage is superior to 5 V.
UM11879
User manual
Associated IO
HVIO1
HVIO2
WAKE1
WAKE2
Cyclic sense
Populate R27 and R34
DNP R36
Populate R27 and R32
DNP R35
Simple output Cyclic sense
Populate
Available
R24 and R14
Populate
Available
R24 and R31
Available
Available
Available if I²C
All information provided in this document is subject to legal disclaimers.
Rev. 2 — 25 September 2023
KITFS23LDOEVM evaluation board
Cyclic sense
Populate R24 and R14
Populate R24 and R31
Populate R27 and R34
DNP R36
Populate R27 and R32
DNP R35
Global input
Populate R36 and DNP R34
Input via SW4 or J10-1
Populate R35 & DNP R32
Input via J10-3
FCCU2 (input) LIMP1 (output) LIMP2 (output)
J23-1-2
J23-3-4
J23-5-6
J23-7-8
Available if I²C
J23-9-10
UM11879
Load/LED driver
Load between
J17-3 and J17-2
Load btw J17-1 and J17-2
Load between
J18-3 and J18-2
Load btw J18-1 and J18-2
Local input
DNP R34 and R36
Input via J10-2
DNP R32 and R35
Input via J10-4
Available
Available
Available
Available
Available if I²C
© 2023 NXP B.V. All rights reserved.
16 / 73