ABB IRB 1090 Product Specification page 14

1 Description
1.1.2 Technical data
Continued
Parameter
Maximum ambient humidity
Operating conditions, robot
The table shows the allowed operating conditions for the robot:
Parameter
Minimum ambient temperature
Maximum ambient temperature
Maximum ambient humidity
i
Protection classes, robot
The table shows the available protection types of the robot, with the corresponding
protection class.
Protection type
Manipulator, protection type Standard
i
Environmental information
The product complies with IEC 63000. Technical documentation for the assessment
of electrical and electronic products with respect to the restriction of hazardous
substances.
Other technical data
Data
Airborne noise level
Power consumption at max load
Type of movement
ISO Cube
Max. velocity (W)
Robot in calibration position
Brakes engaged (W)
Brakes disengaged (W)
Continues on next page
14
At low environmental temperature (below 10° C) a warm-up phase is recommended to be run with
the robot. Otherwise there is a risk that the robot stops or runs with lower performance due to
temperature dependent oil and grease viscosity.
According to IEC 60529.
Description
The sound pressure level out-
side the working space.
© Copyright 2023 ABB. All rights reserved.
Value
85% at constant temperature
(gaseous only)
Value
i
+5°C (41°F)
+40°C (104°F)
85% at constant temperature
i
Protection class
IP40
Note
< 70 dB(A) Leq (acc. to ma-
chinery directive 2006/42/EC)
IRB 1090-3.5/0.58
331
IRB 1090-3.5/0.58
60
130
Product specification - IRB 1090
3HAC088057-001 Revision: B