Set Osd - HIKVISION iDS-TCD403-BI User Manual

Network Traffic Camera (for Traffic Flow Camera) User Manual
5) Select the fixed area that needs to be adjusted and drag the mouse to adjust its position.
6) Click Stop Drawing.
4. Select Area No. and ROI Level and enter Area Name.
Note
The higher the ROI level is, the clearer the image of the detected area is.
5. Click Save.
6. Optional: Select other area codes and repeat the steps above if you need to draw multiple fixed
areas.

5.5 Set OSD

You can customize OSD information on the live view.
Steps
1. Go to Configuration → Device Configuration → Text Overlay → OSD Settings .
2. Set the display mode, size, color, etc.
Note
The supported functions vary with different models. The actual device prevails.
3. Set the display content.
1) Check Display Name and enter the name.
2) Check Display Date, and set the time and date format.
3) Check Display Week or Millisecond according to your needs.
Figure 5-4 Set OSD
25