Chapter 4 Record And Capture; Set Storage Path; Set Storage Card; Set Ftp - HIKVISION iDS-TCD403-BI User Manual

Network Traffic Camera (for Traffic Flow Camera) User Manual

4.1 Set Storage Path

4.1.1 Set Storage Card

If you want to store the files to the storage card, make sure you insert and format the storage card
in advance.
Before You Start
Insert the storage card to the device.
Steps
1. Go to Configuration → Device Configuration → Encoding and Storage → Storage
Management .
2. Format the storage card in two ways.
- Check the storage card, and click Format to format it manually.
Note
For the newly installed storage card, you need to format it manually before using it normally.
- If you want to format the storage card automatically when the card is abnormal, check
Format Backup Storage Automatically.
3. Optional: If the device has been connected to the platform, and you want to upload the storage
card information automatically, check Upload Backup Storage Information Automatically.
4. Click Save.

4.1.2 Set FTP

Set FTP parameters if you want to upload the captured pictures to the FTP server.
Before You Start
Set the FTP server, and ensure the device can communicate normally with the server.
Steps
1. Go to Configuration → Device Configuration → Encoding and Storage → FTP .

Chapter 4 Record and Capture

Figure 4-1 Set Storage Card
15