Otto Bock Taleo Adjust 1C56 Instructions For Use Manual page 15

► Report each serious incident related to the product to the manufacturer
and to the relevant authority in your country. This is particularly import­
ant when there is a decline in the health state.
► Please keep this document for your records.
1.1 Construction and Function
The 1C56 Taleo Adjust prosthetic foot features smooth heel height adjust­
ment (0 mm to 70 mm) for wearing shoes with different heel heights.
Size 27 and 28: Set the prosthetic foot to a maximum heel height of
25 mm.
Carbon and polymer spring elements permit perceptible plantar flexion at
heel strike, a natural rollover and high energy return. A removable heel
wedge absorbs the heel strike.
1.2 Combination possibilities
This prosthetic component is compatible with Ottobock's system of modular
connectors. Functionality with components of other manufacturers that have
compatible modular connectors has not been tested.
2 Intended use
2.1 Indications for use
The product is intended exclusively for lower limb exoprosthetic fittings.
2.2 Area of application
The MOBIS classification describes the mobility grade and body weight,
and makes it easy to identify compatible components.
The product is recommended for mobility grade 2 (restricted
outdoor walker) and mobility grade 3 (unrestricted outdoor walk­
m°
kg
er).
The following table shows the appropriate spring stiffness for the level of
load exerted by the user on the prosthetic foot.
TIP: Users requiring extra stability can test the stiffness for a higher load
level.
Spring stiffness relative to body weight and load level
Body weight [kg]
Up to 51
52 to 58
59 to 67
Low load level
1
2
3
Medium load level
2
3
4
15