Introduction - Rotoclear S3 Instruction Manual

ROTOCLEAR S3

Introduction

Safety information
Before installing and commissioning the unit,
please carefully read through the operating man-
uals for the Rotoclear S3 as well as your machine
tool and its safety functions. We have included in-
formation on installing and using the system safe-
ly. The manufacturer accepts no liability for any is-
sues that may occur due to non-observance of
this operating manual.
Please pay particular attention to the information
symbols.
Disclaimer
The manufacturer accepts no liability in the event
of loss due to fire, earthquake, intervention by
third parties or any other accidents, wilful or acci-
dental misuse, incorrect use or use under abnor-
mal conditions. Repairs resulting from this will be
invoiced by Rotoclear GmbH.
The manufacturer shall not be liable for accidental
loss due to use or non-use of this product, such as
the loss of business revenue.
Rotoclear GmbH accepts no liability in the event
of improper use.
Important information
The nameplate is an integral part of the unit. Any
modification of the unit, alterations to the name-
plate, or opening of the housing will result in a loss
of conformity and void the warranty.
Rotoclear, Rotoclear S3 and "Insights in Sight" are
registered trademarks of Rotoclear GmbH in Ger-
many and other countries.
Optimisations by the manufacturer
The product is subject to a continuous optimis-
ation process. At the manufacturer's discretion,
changes may be made to the geometry, connec-
tions, and interfaces which do not change the
basic concept of the product. The manufacturer is
under no obligation to actively inform customers
about non-functional adjustments to the product.
Intended use
The intended use of the Rotoclear S3 extends to
applications in metal-cutting machine tools, in
particular milling machines and lathes or the cor-
responding closed environments in which media
such as cooling lubricants, oils, water, rinsing and
cleaning fluids are used.
In environments of this kind, visibility is impaired
or obstructed by the media spraying or splashing
onto the window or protective screen. The spin-
ning window of the Rotoclear S3 continuously
flings away any incoming particles or liquids to-
wards the outside to ensure a clear view through
the pane. This requires the purge air to be per-
manently connected to the spinning window (in
accordance with the Rotoclear seal guarantee).
The rotor disc must also rotate constantly to pro-
duce the self-cleaning effect while the machine is
switched on.
The stream of cooling lubricant must not be aimed
directly or targeted at the spinning window.
The unit must not be operated under water or
cooling lubricant, neither completely nor partially.
48