Terminal Strip X2A; Tab. 9 Assignment Of The Terminal Strip X2A - KEB COMBIVERT F6 Instructions For Use Manual

4.2 Terminal strip X2A
2
1
PIN Name Description
1 DI1 / AN3 Digital input 1 (standard) / analog input 3 (special software)
2 DI2 Digital input 2
3 DI3 Digital input 3
4 DI4 Digital input 4
5 DI5 Digital input 5
6 DI6 Digital input 6
7 DI7 Digital input 7
8 DI8 Digital input 8
9 0V Reference potential for digital inputs
10 DO1 Digital output 1
11 0V Reference potential for digital outputs
12 DO2 Digital output 2
13 RLB Relay output / NC contact
14 RLA Relay output / NO contact
15 RLC Relay output/ switching contact
16 24Vout DC voltage output 24V (max. 100 mA together with terminal 26) for the inputs (SELV).
17 AN1- Non-isolated differential input 1
18 AN1+ Non-isolated differential input 1
19 AN2- Non-isolated differential input 2
20 AN2+ Non-isolated differential input 2
21 0V Reference potential for analog inputs and outputs
22 ANOUT Analog output DC 0...10 V
23 CAN low CAN bus ISO High Speed according to ISO/DIN 11896 => fieldbus interfaces
24 CAN high CAN bus ISO High Speed according to ISO/DIN 11896 => fieldbus interfaces
25 CAN GND CAN Ground (≡►
26 24Vout DC voltage output 24V (max. 100 mA together with terminal 16) for control the inputs (SELV).
27 0V Reference potential for P24Vin at external supply
28 P24Vin DC voltage input DC 24V to supply the control board
Tab. 9: Assignment of the terminal strip X2A
ma_dr_f6-cu-a-inst-20118593_en
4 6 8 10 12
3 5 7 9 11
Fieldbus interfaces
Connection of the control | 4
14 16 18 20 22
13 15 17 19 21
[} 27])
24 26 28
23 25 27
17