Advertisement
Silvia PID Installation Guide
Wiring
Size
Color
Length
#14
red
13"
#20
black
48"
#20
gray
48"
#22
white
48"
#22
red
48"
#24 x 2
brown
48"
#18 or
green
45"
#20
Hardware
•
3/8 inch rubber grommet (for installation in bottom cover of enclosure)*
•
1/4 inch rubber grommet (2 each)*
•
M4 x 0.7 nut and lock washer*
•
#10-24 x 1/2 inch machine screw w/hex nut, flat washer, lock washer*
•
3/8 or 1/2 inch white plastic cable clamp*
•
Small wire ties (black) (8 each)*
•
Female-male-male spade terminal (3 each)*
•
Adhesive reclosable fastener pads (4 each)*
•
Packet(s) of white thermal grease*
•
Split cable loom x 20"
•
Large wire ties (black) (2 each)
Electronics (and accessories)
•
Digital PID temperature controller, 1/16 DIN size
•
Solid state relay (SSR), DC control, AC power
•
Clear plastic cover for SSR
Enclosure
•
Brush finish stainless steel enclosure with 1/16 DIN panel cutout
•
Gloss finish black acrylic top and bottom panels for enclosure
•
Acrylic "L" bracket (glossy black, or clear)
•
#6-32 x 3/8 black oxide or SS machine screws (12 each – preinstalled in enclosure)
•
#6-32 x 3/8" machine screw w/ lock washer (ground connection – preinstalled)
Misc.
•
CD ROM with installation guide in PDF format
* these items packaged in a small poly bag
Copyright © 2006, 2007, 2008 MLG Properties, LLC
Silvia PID Kit
Parts List – Watlow 96 kits
Terminal
Terminal
#8 ring ins.
male QD full
(blue)
ins. (blue)
female QD full
stripped and
ins. (red)
tinned
female QD full
stripped and
ins. (red)
tinned
#6 ring ins.
stripped and
(red)
tinned
#6 ring ins.
stripped and
(red)
tinned
#6 ring,
stripped
uninsulated
female QD
#6 ring or
fork
No.
Purpose
2
high voltage leads to SSR
1
high voltage power to
controller (hot, or line)
1
high voltage power to
controller (neutral)
1
DC control to SSR from
controller
1
DC control to SSR from
controller
1
thermocouple probe
1
grounding wire
Advertisement
