Removing and Installing the Midplane
Removing the Midplane
Removing the Midplane from the Chassis
1. Power down the system as described in Section 3-1 and open the chassis covers as
described in Section 3-2.
2. Disconnect the cabling to the midplane.
3. Remove the four screws from both sidewalls of the chassis and the two screws at the
base of the chassis.
4. Lift the midplane bracket up and out of the chassis.
5. Remove the fourteen screws securing the midplane to the midplane bracket.
6. Remove the midplane from the bracket.
Midplane Bracket
Chapter 3: Maintenance and Component Installation
Midplane
Figure 3-16. Installing the Midplane
51