Supermicro SuperStorage 2029P-DN2R24L User Manual page 39

SuperStorage Server 2029P-DN2R24L User's Manual
DIMM Installation
1. Insert the desired number of DIMMs into
the memory slots, starting with P1-DIMM
A1. For the system to work properly,
please use memory modules of the same
type and speed on the motherboard.
2. Push the release tabs outwards on both
ends of the DIMM slot to unlock it.
3. Align the key of the DIMM module with the
receptive point on the memory slot.
4. Align the notches on both ends of the
module against the receptive points on the
ends of the slot.
5. Use two thumbs together to press both
ends of the module straight down into the
slot until the module snaps into place.
6. Press the release tabs to the lock positions
to secure the DIMM module into the slot.
DIMM Module Removal
Press the release tabs on both ends of the
DIMM socket to release the DIMM module from
the socket as shown in the drawing below.
Warnings: 1. Please do not use excessive force when pressing the release tabs on the ends
of the DIMM socket to avoid causing any damage to the DIMM module or the DIMM socket.
2. Please handle DIMM modules with care. Carefully follow all the instructions given on Page
1 of this chapter to prevent ESD-related damages to your memory modules or components.
CPU2
JF1
Release Tabs
Insert the DIMM module into the memory slot.
39
BIOS
DESIGNED IN USA X11DPU-V
LICENSE
REV:1.10
BAR CODE IPMI CODE
CPU1
Notches