VGA Enable/Disable
JPG1 allows you to enable or disable the VGA port. The default setting is Enabled.
Manufacturing Mode Select (ME Select)
Close JPME2 to bypass SPI flash security and force the system to use the Manufacturing
Mode, which will allow you to flash the system firmware from a host server to modify system
settings. See the table below for jumper settings.
I
C Bus for VRM
2
Jumpers JVRM1 and JVRM2 allow the VRM SMBus Clock and Data to access the BMC. See
the table below for jumper settings.
VRM Jumpers
JVRM1
JVRM2
VGA Enable/Disable
Jumper Settings
Jumper Setting
Definition
Pins 1-2
Enabled
Pins 2-3
Disabled
Manufacturing Mode Select
Jumper Settings
Jumper Setting
Definition
Pins 1-2
Normal (Default)
Pins 2-3
Manufacturing Mode
I
C Bus for VRM Jumper Settings
2
Jumper Setting
Definition
On
VRM SMB Clock to BMC (Normal)
On
VRM SMB Data to BMC (Normal)
57
Chapter 4: Motherboard Connections