Table of Contents
Advertisement
Quick Reference Table
Jumper
Description
JBT1
CMOS Clear
JPG1
VGA Enable
JPME2
Manufacturing Mode (ME) Select
JPX1
NTB (Non-Transparent Bridge) Enable
JVRM1
VRM SMBus Clock
JVRM2
VRM SMBus Data
Connector
Description
BT1
Onboard CMOS battery socket
FAN1/FAN2
System cooling fan headers
IPMI_LAN
Dedicated IPMI LAN port
LAN1/LAN2
10GbE LAN ports 1/2 on the I/O back panel
JCPLD1
Complex-Programmable Logical Device (CPLD) header
JSD1/JSD2
Power connectors for SATA DOM (Disk-on-module) devices.
JTPM1
Trusted Platform Module (TPM)/Port 80 connector
M.2-P
PCI-E M.2 slot
S-SATA 3.0 connection ports 0/1 supported by the Intel SCU. These S-SATA ports have power pins
S-SATA0/S-SATA1
built-in and support Supermicro SuperDOM (Disk On Module) devices
SIOM1
PCI-E 3.0 x8 (x16) slot supported by CPU2
USB0/1
Back panel USB 3.0 ports
USB2
Type A USB 3.0 header for front access
VGA
VGA port
LED
Description
LEDM.2
Activity LED for M.2 slot
LEDH (the top LED): BMC Heartbeat
LED
LEDH/LEDL
LEDL (the bottom LED): System
Heatbeat LED
Default Setting
Open (Normal)
Pins 1-2 (Enabled)
Pins 1-2 (Normal)
Pins 1-2 (Enabled)
On (to BMC, Normal)
On (to BMC, Normal)
Status
On: M.2 slot active
LEDH (Blinking): BMC: normal
LEDL (Blinking): system: normal
13
Chapter 1: Introduction
Advertisement
Table of Contents
