Removing The Outer Rails From The Rack - Supermicro SuperStorage 2029P-DN2R24L User Manual

SuperStorage Server 2029P-DN2R24L User's Manual

Removing the Outer Rails From the Rack

In the uncommon event that it is necessary to remove the outer rails from the rack, follow
these instructions. The chassis must be out of the rack.
Releasing the Outer Rails
1. On the front of the outer rail, slide the small plastic safety slider (red in drawing) up and
hold it while pushing the plastic release button (green in drawing) just below it.
2. While holding the release button in, pull the outer rail forward to disengage the pins and
the front of the rail from the rack.
3. Support the front of the outer and middle rail assembly while releasing the rear.
4. Remove the outer rail from the rear of the rack in the same way as the front. Slide the
safety slider up and push and hold the release button, then pull the rear pins out of the
rack and remove the rail.
Safety Slider
Release Button
Note: You have received a different outer rail than the one pictured, This rail features a side
release latch on the front of the outer rail, which opens inward to release the outer rail from the
rack. Contact Supermicro's Technical Support department if you need additional assistance.
Figure 2-7. Removing the Outer Rails
24