Supermicro SuperStorage 2029P-DN2R24L User Manual page 87

SuperStorage Server 2029P-DN2R24L User's Manual
MMCFG Base
This feature determines the lowest MMCFG (Memory-Mapped Configuration) base assigned
to PCI devices. The options are 1G, 1.5G, 1.75G. 2G, 2.25G, and 3G.
NVMe Firmware Source
This feature determines which type of the NVMe firmware should be used in your system.
The options are Vendor Defined Firmware and AMI Native Support.
VGA Priority
This feature selects the graphics device to be used as the primary video display for system
boot. The options are Auto, Onboard and Offboard.
PCH M.2 Slot/RSC-X-66-C Slot1/RSC-X-66-C Slot2/SIOM: CPU2 PCI-E 3.0/SIOM: CPU2
PCI-E 3.0 #2
Select EFI to allow the user to boot the computer using an EFI (Expansible Firmware Interface)
device installed on the PCI-E slot specified by the user. Select Legacy to allow the user to
boot the computer using a legacy device installed on the PCI-E slot specified by the user. The
options are Disabled, Legacy and EFI. (Note: Riser card names may differ in each system.)
Bus Master Enable
Select Enabled to enable the Bus Driver Master bit. The options are Disabled and Enabled.
Onboard LAN Device
Select Enable to use onboard LAN devices for internet connections. The options are Disabled
and Enable.
Onboard LAN1 Option ROM
Use this feature to select the type of device to be installed in LAN Port1 for system boot. The
options are Legacy, EFI, and Disabled.
Onboard LAN2 Option ROM/Onboard LAN3 Option ROM/Onboard LAN4 Option ROM
Use this feature to select the type of device to be installed in LAN Port2/ LAN Port3/LAN
Port4 for system boot. The options are Legacy, EFI, and Disabled.
Onboard Video Option ROM
Use this feature to select the Onboard Video Option ROM type. The options are Disabled,
Legacy and EFI.
86