Table of Contents
Advertisement
SATA Power Connectors
The SATA power connectors at JSD1 and JSD2 provide 5V power to onboard SATA devices.
Refer to the table below for pin definitions.
PCI-E M.2 Slot
The X11DSN-TS motherboard has one PCI-E M.2 slot. M.2 was formerly Next Generation
Form Factor (NGFF) and serves to replace mini PCI-E. M.2 allows for a variety of card sizes,
increased functionality, and spatial efficiency. The M.2 socket on the motherboard supports
PCI-E 3.0 x4 (32 Gb/s) SSD cards in the 2280 form factors.
B
A
Holder
Locked position
C
Card Holder Mount
D
Locked position
Turn 90 degrees
with M.2 card
to lock
S-SATA 3.0 Ports
Two S-SATA 3.0 ports (S-SATA0/ S-SATA1) that are supported by the Intel Intel C624 chipset
are located on the motherboard. These two S-SATA ports have power pins built in and can
be used with Supermicro SuperDOMs which do not need external power cable support.
Supermicro SuperDOMs are backward-compatible with regular SATA HDDs or SATA DOMs
that need external power cables.
VGA Port
The onboard VGA port is located next to the SIOM slot on the motherboard. Use this
connection for VGA display.
SATA Power
Pin Definitions
Pin#
Definition
1
5V
2
Ground
3
Ground
Holder
Mount
Turn 90 degrees
Locked position
to lock
Plastic screw
STOP
53
Chapter 4: Motherboard Connections
Hole Location on the MB
Press in here
M.2 Card 60
Rectangle hole
M.2 Card 80
on MB
M.2 Card 110
A+B+C
B
C
A
©
Copyright
2017 by Super Micro Computer, Inc. All rights reserved.
42
A+B+C
A+B+C
A+B+D
A+B+D
D
B
A
Advertisement
Table of Contents
