Table of Contents
Advertisement
SuperStorage Server 2029P-DN2R24L User's Manual
A.1 BIOS Error Beep (POST) Codes
During the POST (Power-On Self-Test) routines, which are performed each time the system
is powered on, errors may occur.
Non-fatal errors are those which, in most cases, allow the system to continue the boot-up
process. The error messages normally appear on the screen.
Fatal errors are those which will not allow the system to continue the boot-up procedure. If
a fatal error occurs, you should consult with your system manufacturer for possible repairs.
These fatal errors are usually communicated through a series of audible beeps.
Beep Code
Error Message
1 beep
Refresh
5 short, 1 long
Memory error
5 long, 2 short
Display memory read/write error
1 long continuous
System OH
Appendix A
BIOS Error Codes
BIOS Beep (POST) Codes
Description
Circuits have been reset (Ready to power up)
No memory detected in system
Video adapter missing or with faulty memory
System overheat condition
110
Advertisement
Table of Contents
