SuperStorage Server 2029P-DN2R24L User's Manual
2.3 Installing the Rails
There are a variety of rack units on the market, which may require a slightly different assembly
procedure.
The following is a basic guideline for installing the system into a rack with the rack mounting
hardware provided. You should also refer to the installation instructions that came with the
specific rack you are using.
Note: This rail will fit a rack between 26.5" and 36.4" deep.
Identifying the Rails
The chassis package includes two rail assemblies. Each assembly consists of three sections:
An inner rail that secures directly to the chassis, an outer rail that secures to the rack, and
a middle rail which extends from the outer rail. These assemblies are specifically designed
for the left and right side of the chassis.
Middle Rails, Front
Figure 2-1. Identifying the Inner Rails, Middle Rails and Outer Rails
Inner Rails
Left Outer Rail
Right Outer Rail
18
Inner Rails
Outer Rails, Rear